Storm Damage Roof Repair in Citrus County

What this involves

How storm damage gets assessed and repaired

After a storm, the damage that matters is often not the damage you can see from the yard. Missing shingles are obvious. Creased shingles, where wind lifted a tab and folded it back down, look intact from the ground but have a broken seal line and a fractured mat that will leak in the next rain. Hail bruises asphalt without removing granules right away. Uplift can break the seal between courses across a whole slope while leaving every shingle in place. We document all of it with photographs and measurements before anything gets touched, so the scope reflects what actually happened up there.

The first priority is stopping water. That means dry-in: tarping open sections or installing temporary underlayment so the interior stops taking on moisture while the permanent repair is scheduled. Then we separate the roof into what can be repaired and what has lost its integrity. A slope with scattered missing shingles and sound decking gets repaired. A slope where the seal has failed broadly, or where decking is split at the nail lines, needs replacement, because new shingles fastened to compromised sheathing will not hold in the next wind event. If you are filing a claim, our documentation supports it.

Materials

Materials for storm repair work

Storm work uses the same materials as any repair, chosen and fastened for wind. An asphalt shingle's wind rating depends as much on nailing as on the shingle itself, so we set the manufacturer's high-wind pattern, with six fasteners where the product calls for it and nails driven flush in the nail zone. Starter strip goes along every eave and rake instead of cut-up field shingles, because the factory adhesive on that first course is what holds the edge down. Ridge and hip caps get sealed. Metal accessories dented by impact are replaced, not straightened. For temporary dry-in we use reinforced tarp or peel-and-stick membrane, depending on how long the roof has to wait.